Skip to content

HPVR-1500 PDB

Superior filtration system
High vertical suction column
Jurop PVT series blowers

Starting From: R 2,200,000 ex VAT
Chassis not included.

Superior filtration system
High vertical suction column
Jurop PVT series blowers

Starting From: R 2,200,000 ex VAT
Chassis not included.

By far the most powerful vacuum truck in South Africa, the HPVR-1500 PDB is specifically built for moving large quantities of high density material like iron ore, platinum slag, etc. It also has a superior filtration system when dry bulk is handled or in high vacuum applications like the cleaning of digesters where a high vertical suction column is required.

  1. The vacuum tank has a 16 000 liter capacity, is of 316L Stainless Steel construction with a 6mm shell and 6% toro-spherical dishedends. Rolled channel rings are installed for extra reinforcing to ensure structural integrity and long life.
  2. Tank tips hydraulically with a 14 ton tipping cylinder, up to 50 degree tipping angle. A burst valve protection.
  3. Protection bars for all peripheral extrusions like valves, manholes, etc.
  4. The tank features a full opening rear door with hydraulic opening and adjustable hinges, the door fastens with 6 hydraulic operated clamps with mechanical locking to prevent accidental opening while driving. The door is secured in the opening position by a mechanical safety hook to prevent accidental closing during tank cleaning and maintenance procedures. The tank door seals with a heavy duty EPDM seal that is corrosion resistant and offers high mechanical wear resistance.
  5. The tank is fitted with D150 PN16 ball valves at the back for suction and liquid discharge operations, fitted with perrot-type couplings, blanks with 12 mm drain valve and 90 degree elbow.
  6. Twin cyclone filtration system to trap carry-overs and excess material during over filling, knock-out boxes for easy inspection and material removal.
  7. The tank door is fitted with swing ball floating level indicator indicating full and empty tank levels.
  8. The tank is fitted with flared spillage chutes at the back to limit spillage during dumping.
  9. Two revolving strobe lights fitted on tank for night time visibility with a work light at the back for night time operation.
  10. The tank is fitted with primary float ball knock out and material deflector on internal suction port.
  11. Pneumatic tank isolation valve with automatic operation to isolate tank during driving to prevent on-road spillage.
  12. Self-aligning vacuum tie-in pipe for low maintenance and to prevent leakage.
  13. Easy and safe access ladders with full length walkways and non-slip, corrosion resistant surfaces. Harness attachment points where working-at-heights is required.
  14. ADR certified manhole with pressure relief valve and rupture disc protection.
  15. Walkway sides provide ample space for client branding.
  16. Hazard board holders with clips for quick board changing for different cargoes.
  17. The tank is designed for 10 bar pressure and is tested to 1.4 bar.
  18. NDT, 10 x-ray, waterfill and pressure test are performed on tank prior to delivery.

  1. Low volume 30 lpm system.
  2. 70 liter hydraulic tank.
  3. Automated system for clamp, door and safety hook operation. (1 button push control).
  4. Push button control so that door can only be opened from appropriate operator positions to prevent the chance of injury in case of spillage.
  5. Two hand control available on request.
  6. Pneumatic control eliminates the need for electronic safety control
  7. Lock-out when system not in use to protect against unintended movements of the system.
  8. PTO drive lock-out system to prevent operation during driving.
  1. The truck is fitted with steel mudguards.
  2. Fitted with 2 steel tool boxes to store PPE, material and fittings.
  3. SABS tested underrun bumper with chevron and lights.
  4. A Muck box is installed to store dirty fittings, PPE, etc.
  5. An 8 millimetre static earth line cable with clamp is fitted on a selfretracting hose reel. Cable length is 10 meters.
  6. 13 lpm, 120 bar high pressure pump with lance and retractable hose reel to clean machine after operation.
  1. 380 kW vertical split shaft gearbox drive.
  2. 2500 Nm constant drive.
  3. 25 kN drive through torque (35 kN intermittend drive through torque).
  4. Syncrhronous gearbox switching.
  5. Pneumatic in-cab switching with lock-out protection to prevent accidental switch over.
  6. Fast reacting emergency stop.
  1. Drive
    1. Double kardan shaft with bolt on shaft guard and acces for inspection and grease maintenance.

  2. Positive displacement blower.

    1. Tri lobe positive displacement blower.

    2. 6400 cmh free air flow volume and up to -90 kPa (Gauge) continuous pressure.

    3. Overheating protection for blower unit.

    4. Continuous air injection cooling with silencer featuring removable sound absorbent material and cleanout function.

    5. Centre frame mount for easy access and optimal weight distribution.

    6. Re-active/absorbent exhaust silencer with top discharge,

  3. Filtration

    Stage 1:

    5.3.1.1. Deflection plates inside tank.

    5.3.1.2. Stainless steel floating ball primary shut off.

    Stage 2:
    High performance dual cyclone filtration system withautomatic dumping.

    Stage 3:

    5.3.3.1. Bag filter unit.

    5.3.3.2. Pulsating air injection cleaning.

    5.3.3.3. 60 filter socks on mesh cages, 127 mm diameter by

    1400 mm length to ensure big filtration area to prevent blockages.

    5.3.3.4. Automatic material dumping.

    5.3.3.5. Continuous filter monitor.

    5.3.3.6. Anti-corrosive coating.

    5.3.3.7. Top opening door for filter inspection and cleaning.

    5.3.3.8. Side opening inspection doors.

    5.3.4. Stage 4: Stainless steel mesh final filter.

    5.3.5. Easy and safe access ladder to filter unit with harness attachment points.

    5.3.6. Flanged pipe connections for easy cleaning and maintenance

  1. Iveco Trakker 8×4 with chassis extension.
  2. 270 kW @ 1500 – 1800 rpm.
  3. 1754 Nm torque at 950 – 1450 rpm.
  4. Emissions: Euro III.
  5. ZF Manual Gearbox with automatic shifting.
  6. Power Steering and exhaust brake.
  7. Air conditioned cab with radio and CD player.
  8. Digital multi display with hour, trip and odo meters.
  9. Hour meter to monitor service cycles.
  10. Air suspension driver seat for comfort on long distance travelling
  11. The entire power train has been designed to be more environmentally-friendly and improve fuel efficiency, at levels that clearly exceed the requirements of Euro III regulations.
  12. The Iveco Trakker cabin is mounted on a 4-point wide tread air suspension mounting system, which improves cabin stability and enhancing overall driving comfort. The design helps to limit the cabin from rolling when the truck is turning, and the anti-nosedive geometry ensures stability of the cabin even under harsh braking.
  1. Fast reacting pneumatic e-stops for high pressure and vacuum operations.
  2. Mechanical safety hook to secure door in open position when cleaning or maintenance is required.
  3. Mechanical locking door clamps to prevent accidental door opening when travelling.
  4. Lock-out gearbox switch mechanism to prevent accidental gearbox switch-over when driving.
  5. Walkways with harness attachment point for where working-at-heights are required.
  6. Automatic PTO lockout when driving.
  7. Automatic tank isolation valve when driving.
  8. Detailed decals to indicate component locations.
  9. Warning decals where necessary.

Ideal for x-cuts, panel cleaning without any product dilution (carbon based panels), belt cleaning, shaft bottoms. Maintains up to 10-15 tons per shift on panel cleaning. Can be operated in parallel to increase suction volume.

Vertical suction distance up to 20 meters (Up to 90 meters with multiple units in parallel).

Horizontal suction distance up to 200 meters depending on product.

Additional Options

  • Hydraulic suction boom
  • Saddle Water Tanks
  • Access walkway
  • Wireless Remote
  • Reverse Camera
  • Washdown Gun
  • Branding Panels
  • Proximity Sensors
Back To Top